How to Build my 8 Mining Rig For Ethereum?
- A mining rig frame that can hold all your hardware in
- Ram: 4GB DDR4
- Price 70 USD
- GPU: 8X Radeon RX580 8Gb
- Mining Hash Rate per overclocked unit – 32 Mh/s x 8 = 256 Mh/s
- Power consumption – 185 W x 8 = 1480 W
- Price – 600 USD x 8 = 4800 USD
- PSU: 2X Corsair AXi Series, AX860i, 860 Watt (860W) ( Total 1720 W) + CablesThe latest
- Price 230 USD x2 = 460 USD
- Risers: 8X Sata Ver007 + 1X Molex Ver006
- Total price 70 USD
- Expansions cards: 2X M.2 PCIE 4X
- Price: 16 USD for the 2 of them
- Total price for material to build a 8 GPU Mining Rig
- How much can i profit from this mining rig?
With all this crypto hype, it is normal that you may feel tempted to build your 1st mining rig, and flavor the profits of your work.In this article we will try to guide you through all the process, please note that prices were based on Amazon US prices, you may find the same equipment at different prices depending from where you are.
All the installation was thought to be upgraded in the future, as the Motherboard olds 16 GPUs and to be over-dimensioned in power availability.
The materials you will need for your rig:
A mining rig frame that can hold all your hardware in
In tis case you must consider all the GPUs, with possible expansion that you may like to acquire later.
Price to expect for a 8 GPU unit around 180USD
There are several models on the market with capabilities to run 8, GPUS, for our example we chose the
The Prime Z270-A is one of Asus’ best motherboards in the mid-range, and its specification is extremely well-balanced
The basic specifications are covered. The Prime supports 64GB of DDR4 at speeds of up to 3866MHz, and the two PCI-Express x16 slots can run in dual 8x mode – so there’s enough bandwidth to run two high-end GPUs for future expansion.
Price 170 USD
Power consumption: 65 W
G3900 Skylake Celeron, used
In this matter as the mining capability for ethereum lyes on the GPUS, we decided to use a USED dual core for the job.
Power consumption : 51 W
Ram: 4GB DDR4
For the ram we will use Kingston HyperX Fury 4GB 2133MHz DDR4
Kingston is well known for it’s computer components, and for good reason, because they are good!
The cheapest option in their HyperX FURY line is this 4GB single DIMM option.
Price 70 USD
GPU: 8X Radeon RX580 8Gb
Radeon, Shapphire, Gigabyte, Asus, MSI, Powercolor are some of the Manufacturers using AMD RX 580 Chip
Mining Hash Rate per overclocked unit – 32 Mh/s x 8 = 256 Mh/s
Power consumption – 185 W x 8 = 1480 W
Price – 600 USD x 8 = 4800 USD
PSU: 2X Corsair AXi Series, AX860i, 860 Watt (860W) ( Total 1720 W) + CablesThe latest
ATX12V v2.31 and EPS 2.92 standards and it is backward compatible with ATX12V 2.2 and ATX12V 2.01 systems.
Silent at low to moderate load due to high efficiency and zero RPM fanless mode. Ultra quiet at high loads with 120mm dual-ball bearing fan
80 PLUS Platinum certified, delivering over 92% energy efficiency at real world load conditions. Active Power Factor Correction (PFC) with PF value of 0.99. Universal AC input from 90~264V
Price 230 USD x2 = 460 USD
Risers: 8X Sata Ver007 + 1X Molex Ver006
4-Pin riser kits are the perfect solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners.
3 High Quality Solid Capacitors for reliable and safe power delivery. Gold plated contacts for flawless connectivity and a long lifespan.
Total price 70 USD
Expansions cards: 2X M.2 PCIE 4X
The expansion cards Convert M.2 M Key NGFF to PCI-E X4 interface
Support all Windows Systems, LINUX MAC, no drivers needed
Price: 16 USD for the 2 of them
Total price for material to build a 8 GPU Mining Rig
Rig frame – 180USD
Mother Board Z270-A – 170 USD
1 used G3900 Skylake Celeron, – 50 USD
RAM Kingston HyperX Fury 4GB 2133MHz DDR4 – 70 USD
8X Radeon RX580 8Gb – 4800 USD
2X Corsair AXi Series, AX860i, 860 Watt – 460 USD
8X Sata Ver007 + 1X Molex Ver006 – 70 USD
Expansions cards: 2X M.2 PCIE 4X – 16 USD
TOTAL: 5816 USD
How much can i profit from this mining rig?
With a total 256 Mh/s and a operating consumption of 1400 W and a KWh of 0.18USD and the Ethereum value in 1-19-2018
Printed in 1-19-2018
With a Profit Ratio per day of 343% and a profit per month of $624 we can not deny it is profitable, and if you do the math you will discover that you return your investment in less than 10 months.
Get your hands on the job and start building that mining rig you so much desire.
So did you learned about 8 Mining Rig For Ethereum. How Much it Costs? Investment Return??
Please let us now your comments